The Sigma 3 Pulldown is a no-compromise LED solution that provides the most flexible possible adjustable pulldown luminaire on a single fixture along with multiple beam angle options. With a variety of trims, lumens, wattage and color combinations, it offers an ideal solution to suit any space.
Multi-faceted reflector available in spot (15°), narrow (24°), medium (38°) and flood (60°) beam angles.
At full extension each light source is independently adjustable to 75° tilt off of vertical and allows for 350° rotation.
Available with high powered BRIDGELUX LED chip that maintains high lumens per watt with a typical 90 CRI.
Integrated TIR dome lens with clear protective cover. Optional honeycomb, soft lens, cross louver and snoot are also available.
Multiple dimming options are available. 100~10% dimming with TRIAC/ELV, 100~1% dimming with 0-10V, and dim to off with compatible devices. See LED Driver Options for details. Consult factory for compatible dimmers.
Extruded aluminum heat sink ensures optimal heat dissipation and LED life.
The LED driver is remote mounted to allow for a lower operating temperature of the LED, longer life, and serviceable separate from the fixture. Includes an 18" (457mm) plenum rated FT6 wire with DC 2.1 connector from the driver to fixture. See LED Driver Options for more specific details.
Integral thermal protection provided on all models to indicate improper installations. Mounted to the junction box and will disconnect if insulation is detected. Insulation must maintain 3" (76mm) clearance from top or sides.
Hanger Bars - New Construction
Rigid hanger bars extend up to 25" (635mm). Score lines on the hanger bars allow for tool-less shortening down to 12" (305mm). Built-in line-up foot allows for accurate housing height during installation. Integrated T-bar clips easily snap onto T-bars.
Hanger Bars - Architectural C-Channel
Architectural frame bracket accepts C-channel and EMT conduit. Vertically adjustable.
Trimless adapter provides a flush and seemless ceiling mount. Trimless adapter is also available prefabricated in level 5 drywall for ease of installation.
Fixtures can be shipped complete or with rough-in components first, and the remainder once requested.
Suitable for use in damp locations.
Selected Order Number
Please validate selection on spec sheet
Trimless Adapter Included
Trimless Adapter Pre-Installed in 1/2" Drywall
Trimless Adapter Pre-Installed in 5/8" Drywall
2,500 lm (25W, Non-IC)
Protective Clear Lens
TRIAC, ELV, 0-10V (120-277V)
Rated -40°C, 0-10V (120-277V & 347V)
DALI, Rated -40°C (120-277V & 347V)
Emergency Backup, 0-10V (120-277V)
Lutron EcoSystem (120-277V)
Casambi Enabled Driver, (120-277V)
New Construction - Hanger Bars
New Construction - Butterfly Brackets
Ship Rough-in First